Hot New Products Laboratory Overhead Stirrer - Water-Jacketed CO₂ Incubator - LuoRon

Send email to us email whatsapp

Product Detail

Product Tags

Feedback (2)

Our mission is usually to turn into an innovative provider of high-tech digital and communication devices by providing worth added design and style, world-class producing, and repair capabilities for Bench Top Centrifuge, 96 deep well plate, plastic cell culture plate, In addition, we would properly guide the customers about the application techniques to adopt our products and the way to select appropriate materials.

Hot New Products Laboratory Overhead Stirrer - Water-Jacketed CO₂ Incubator – LuoRon Detail:

HEPA filter

HF160W applies long term effectiveness of the HEPA filter to protect your cultures. The filter is very efficient to entrap particulates larger than 0.3μm at 99.97%. The HEPA filter system runs continuously and within every 60 seconds, the volume of entire chamber is disinfected. With help of HEPA filter, the air quality achieves Class 100 clean room levels within 5 minutes following a door opening.

Airflow system

Optimized air flow system ensures the temperature and CO₂ concentration to be stable and uniform within the chamber.

AUTO-ZERO/AUTO-START

HF160W combines precise CO₂ control with a choice of TC or IR sensors. The microprocessor will automatically “Zero” the incubator(IR type) using room air as a reference every 24 hours. Auto-start function for TC type ensures the sensor’s beseline automatically reset without manual adjustment. These features will maintain an accurate CO₂ control without worrying about CO2 drift.

Automatic control door heater

The outer door incorporates a door heater which is interlocked with the surrounding temperature monitoring system. This prevents temperature differences between the chamber and the inner door, thereby preventing condensation.

Humidity display and alarming system

HF160W is able to create a high humidity environment and the relative humidity (RH) is displayed on the panel, readable in 0.1% increments, including low RH programmable alarm(alerts you of need to add water)

Space Utility

Automatic gas cylinder switchover system

This system automatically switches from the primary to secondary gas cylinder when CO2 gas level does not change while an injection valve is open.

A. power switch

B. camber gas sample port

C. fill port

D. CO2 sensor

E. temperature sensor

F. humidity sensor

G. piling leg

H. mirror finish shelves

I. water jacket

J. glass fibre insulator

K. high efficiency HEPA

L. magnetic gasket

M. outer door heater

N. water pan

O. water jacket drain

P. coved corner

HF160W Specifications

*HF160W Specifications*
Construction	655×656×1030(mm) 25.8×25.8×40.5(inch)	Humidity	Humidity pan
Exterior dimensions (W×D×H)	544×504×681(mm) 21.4×19.8×26.8(inch)	Humidifying system	Standard
Interior dimensions (W×D×H)	185L/6.5cu.ft.	Humidifying sensor	≥95%
Interior Volume	43.5L/1.54cu.ft.	Relative humidity	In 0.1% increments
Water jacket volume	110kg/242lbs	Display	3L
Net Weight	Type 304, mirror finish stainless steel	Water reservior volume	“466×440(mm)18.3×17.3(inch)
Interior	cold-rolled steel, power coated	Shelves	Type 304, mirror finish, stainless steel
Exterior	one inner door standard	Shelf dimensions (W×D)	3,11
Inner door	Water Jacket	Shelf construction	Standard
Temperature	Microprocessor	Standard, Maximum	0.3μm，Efficiency:99.998% (for CO2)
Heating method	PT1000	Fittings	Standard
Temp. control system	5℃ above ambient temperature to 55℃	Access port	HEPA filter system
Temp. sensor	±0.2℃	Air filter	430W
Temp. range	±0.1℃	Remote alarm contacts	220V/50Hz (standard),
Temp. uniformity	0.1 MPa	De-contamination	110V/60Hz (Optional)
Temp. stability	Microprocessor	Rated power	Power interruption * High/low temperature *
CO2	Thermal conductivity/Infrared	Power supply	Deviation of CO2 * RH * Door ajar *
Inlet pressure	0 to 20%	Alarm system	Independent overheat protection
CO2 control system	±0.1%	Data output	RS232
CO2 sensor	655×656×1030(mm) 25.8×25.8×40.5(inch)	Humidity	Humidity pan
CO2 range	544×504×681(mm) 21.4×19.8×26.8(inch)	Humidifying system	Standard
CO2 stability	185L/6.5cu.ft.	Humidifying sensor	≥95%

Product detail pictures:

Related Product Guide:

We believe in: Innovation is our soul and spirit. High-quality is our life. Purchaser need is our God for Hot New Products Laboratory Overhead Stirrer - Water-Jacketed CO₂ Incubator – LuoRon , The product will supply to all over the world, such as: Florida, India, Leicester, Furthermore, all of our items are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. If you are interested in any of our goods, please don't hesitate to contact us. We will do our best to meet your needs.

200ul Pipette Tip

Carpet Centrifugal Machine

Gilson Pipette

Graduated Pipette Box

High Speed Refrigerated Centrifuge

Magnetic Tip Comb

Microhematocrit Centrifuge

Pipette Tip Refill

Sterile Pipette Tip

White Pipette Tip

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.